1, require regular daily cleaning, removal of debris on the table limit and rail, and spray lubricant on the rail.
2, every two weeks, timed cleaning chiller drain the machine visceral water, plus full of pure water.
3, should be regularly remove waste collection box to prevent waste too much plug the exhaust port.
4, mirror and focusing lens to every 6-8 hours with a special cleaning fluid, paint wash, paint wash, use a cotton
swab or cotton swab dipped in cleaning fluid, paint wash from the focusing mirror center to the edge of the counter-clockwise, at the same time care should be taken lens to prevent scratches.laser cutter
5, the life of the indoor environment of the machine will have an impact, especially humid and dusty environment.
Humid environment is easy to make lens reflex rust, and are likely to cause a short circuit or laser discharge ignition.